Harbor Freight Led Solar Security Light Production Manual

Manual for the 94747 LED Solar Security Lite 94747 LED Solar Security Light

2015-05-27

: Harbor-Freight Harbor-Freight-Led-Solar-Security-Light-Product-Manual-724094 harbor-freight-led-solar-security-light-product-manual-724094 harbor-freight pdf

Open the PDF direct: View PDF PDF.
Page Count: 8 

Solar Security LED Low-cal Model 94747 Set up And Operating Instructions  Visit our website at: http://www.harborfreight.com  	 Read this material before using this product. Failure to do so tin can upshot in serious injury. Salve this manual. Copyright© 2006 past Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in whatever shape or form without the express written consent of Harbor Freight Tools. Diagrams inside this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.  For technical questions or replacement parts, please call i-800-444-3353. Manual Revised 09k  Relieve This Manual  industrial low-cal. In that location are sure applications for which this product was designed. It will practice the job better and more safely at the rate for which it was intended. Do non alter this item and do non use this product for a purpose for which it was not intended.  You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Go on your invoice with this transmission. Write the invoice number on the inside of the front embrace. Keep the manual 6.	 Dress properly. Do not wear loose habiliment or jewelry as they and invoice in a safe and dry out place for can be caught in moving parts. future reference. Protective, electrically non-conductive dress and not-sideslip footwear are Safe Warnings and recommended when working. Wear restrictive pilus covering to comprise Precautions long pilus. Warning: When using tool, bones 7.	 Do not overreach. Continue proper safety precautions should ever footing and rest at all times. Exercise be followed to reduce the risk of not reach over or across running personal injury and damage to machines. equipment.  Read all instructions earlier using this tool! i.	 Keep work area make clean. Cluttered areas invite injuries. 2.	 Observe work area weather condition. Do not use machines or power tools in clammy or moisture locations. Don't expose Control Unit to rain. Keep work area well lit. Do not use electrically powered tools in the presence of flammable gases or liquids. 3.	 Keep children abroad. Children must never be allowed in the piece of work area. Practice not permit them handle machines, tools, or extension cords. 4.	 Store idle equipment. When not in use, tools must exist stored in a dry location to inhibit rust. E'er lock up tools and keep out of reach of children.  eight.	 Maintain tools with care. Keep tools maintained and clean for better and safer performance. Inspect tool cords periodically and, if damaged, have them repaired past an authorized technician. 9.	 Disconnect power. Disconnect solar panel when security calorie-free is disconnected or turned off. 10.	 Avoid unintentional starting. Disconnect the solar panels from the control unit earlier doing any maintenance to the light. eleven.	 Stay alert. Watch what you are doing, use common sense. Do not operate any tool when y'all are tired.  12.	 Check for damaged parts. Before using any tool, whatsoever part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended v.	 Apply the correct product for the job. office. Check for any broken parts Do not endeavour to force a small low-cal or or mounting fixtures; and any other attachment to do the work of a larger condition that may affect proper Page 2  For technical questions, delight call ane-800-444-3353.  REV 06k  SKU 94747  operation. Whatsoever part that is damaged should exist properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 13.	 Baby-sit against electric shock. Prevent trunk contact with grounded surfaces such equally pipes, radiators, ranges, and refrigerator enclosures. 14.	 Replacement parts and accessories. When servicing, utilize only identical replacement parts. Use of whatsoever other parts volition void the warranty. Only employ accessories intended for employ with this tool. Approved accessories are available from Harbor Freight Tools. 15.	 Do not operate tool if under the influence of alcohol or drugs. Read alert labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, practice non operate the tool. xvi.	 Maintenance. For your safe, service and maintenance should exist performed regularly by a qualified technician. 17.	 The warnings, cautions, and instructions discussed in this education manual cannot cover all possible atmospheric condition and situations that may occur. It must be understood by the operator that common sense and circumspection are factors which cannot be built into this product, merely must be supplied by the operator.  SKU 94747  For technical questions, please call 1-800-444-3353.  Folio 3  Specifications  Mounting  600 mAh, 6V NiCd (5x'AA' Pack) Detects movement upward to 25 feet Sensor Range away Amorphous solar cells with LED Structure calorie-free and battery in plastic case Delay Fourth dimension 3 – 45 seconds Light Sensitivity 0 – 10000 Lux  The solar console produces electricity in the presence of sunlight. The amount of electricity produced increases as the sunlight becomes stronger. Less ability is produced in less sunlight, but the console will generate electricity even on cloudy days.  Battery  Unpacking When unpacking, make certain that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353.  Components  This product includes a NiCd 6V rechargeable battery to shop energy created during the solar day for employ in the light at other times. The security low-cal uses a bright, energy efficient LED calorie-free which operates when the motion detector observes movement upward to 25 anxiety abroad. The range and management of the motility detector may exist adapted to embrace a small area, such as an entryway or a large area, such as a yard.  Mounting the Solar Console: one.	 Select a location for the solar console that volition allow sufficient sunlight to charge the bombardment. Sensor Lamp  Front View  OFF/Auto Switch Mounting Holes  Back View  2.	 The Solar Panel (ane) is attached to the Console Base (2). Using the screws provided attach the Panel Base to an appropriate location. Note: The location selected must be able to support the weight of the solar panel, and whatsoever boosted stress that may be placed on it by current of air, etc. Installation may damage roofing material. CAUTION: Whenever drilling holes or mounting screws check to be sure that no wires, pipes or other utilities are in the path of the holes or screws.  Command Knobs Socket  Bottom View Page 4  Hinges  Side View  CAUTION: This is a rigid solar panel which may exist damaged by bending or twisting. Be sure to locate this solar  For technical questions, please call one-800-444-3353.  REV 06i, 09k  SKU 94747  console in a manner that it is protected from damage. 3.	 The Solar Panel can rotate on the Console Base of operations. Suit the solar panel to maximize its exposure to sunlight.  Mounting the Sensor/Lamp Base of operations: i.	 Measure the distance between the mounting holes on the back of the Sensor/Lamp Base. Marker this altitude on the surface where the lamp volition be mounted. The Sensor/ Lamp Base uses "keyhole" slots for the mounting screws. Install provided screws at the marked locations and mountain the Sensor/Lamp Base on the screws. 2.	 Run the Cord from the Solar Panel to the Sensor/Lamp Base of operations. Secure the Cord so it will not be pulled loose or damaged.  Panel Base of operations Plug  Solar Panel  3.	 Insert the Plug from the Solar Panel into the Socket at the bottom of the Sensor/Lamp Base. 4.	 Suit the Lamp (6) to shine where desired. five.	 Accommodate the Sensor (4) to detect movement in the desired area. SKU 94747  For technical questions, please call 1-800-444-3353.  Page 5  Operation 	 This device captures electrical energy from sunlight and stores it in a rechargeable battery. The motility sensor volition detect motion, and volition cause the security light to come ON. You have several adjustments available to suit this device to your particular needs.  NOTE: Equally the ambience temperature rises above 98° F. the constructive range of the motion detector will be reduced.  MAINTENANCE 1.	 Protect this device from damage or excess exposure to pelting, sun and wind.  ane.	 On the back of the Sensor/Lamp 2.	 Occasionally clean the solar panel Base at that place is a office switch. Select surface, Lamp and Sensor with between OFF or AUTO. When in the a clean soft cloth. Do non utilise OFF position, the security calorie-free will detergents or solvents for cleaning. stay off. In the Automobile position, the light will come up on only if the darkness 3.	 Occasionally check the Socket and Plug to be sure there is a proficient level is less than the selected level connection. and the motion sensor detects motion. 2.	 There are 3 knobs on the underside of the Sensor. The "Darkness" knob sets the level of darkness required for the unit to operate, equally long every bit the part switch is in the Machine position. The range is from 0 Lux ( total darkness) to 10,000 Lux (moderate indoor daylight). The "Fourth dimension" knob lets y'all prepare the elapsing of time the light will remain on after being triggered. The range is from 3 seconds minimum to 45 seconds maximum. The "Sensitivity" knob lets yous adjust the distance that is covered by the motion detector. You can also arrange the position of the Sensor to command its expanse of coverage.  4.	 When the lamp no longer illuminates, even later receiving sufficient sunlight, the battery needs to be replaced. NiCd batteries must be recycled or disposed of properly. To remove the battery, remove all screws at dorsum of the Sensor/Lamp Base (same side where the OFF/AUTO switch is), open the cover, and supervene upon the bombardment. Reassemble in the reverse club of assembly.  3.	 Both the Sensor and the Lamp may exist adapted. Loosen the mounting screws on each, adjust the position, and retighten the mounting screws. Annotation: Information technology is recommended that the battery be charged for at least 14 hours of daylight earlier first use of the light.  Page 6  For technical questions, delight call 1-800-444-3353.  SKU 94747  Parts Listing and Diagram Part 1 2 3 4 five vi 7  Description Solar Panel Panel Base 8' Cord Sensor Sensor/Lamp Base Lamp Mounting Screws m4 10 20 (not shown)  Q'ty 1 1 ane ane 1 1 v  1 half dozen  5  2  3  four Record Product's Serial Number Here: Note:	 If product has no serial number, record month and yr of purchase instead. Notation:	 Some parts are listed and shown for illustration purposes but, and are not available individually equally replacement parts. SKU 94747  For technical questions, please telephone call 1-800-444-3353.  Page 7  Delight READ THE FOLLOWING Carefully The manufacturer and/or distributor has provided the parts list and associates diagram in this manual equally a reference tool merely. Neither the manufacturer or distributor makes whatsoever representation or warranty of whatever kind to the heir-apparent that he or she is qualified to make whatsoever repairs to the product, or that he or she is qualified to supersede any parts of the production. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should exist undertaken past certified and licensed technicians, and not by the buyer. The heir-apparent assumes all take chances and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.  Page 8  For technical questions, please call ane-800-444-3353.  SKU 94747

Source Exif Information: 

File Blazon                       : PDF File Type Extension             : pdf MIME Type                       : application/pdf PDF Version                     : 1.4 Linearized                      : Yeah Tagged PDF                      : Yes XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon April 02 2007 eighteen:36:42 Instance ID                     : uuid:75f3456a-c6f7-421a-bce3-2ad83c77d318 Document ID                     : adobe:docid:indd:691ae842-c94e-11de-bf67-894dcdb028f1 Rendition Class                 : proof:pdf Derived From Case ID        : 691ae841-c94e-11de-bf67-894dcdb028f1 Derived From Certificate ID        : adobe:docid:indd:691ae840-c94e-11de-bf67-894dcdb028f1 Manifest Link Form              : DirectStream, DirectStream, DirectStream Manifest Placed X Resolution    : 300.00, 150.00, 150.00 Manifest Placed Y Resolution    : 300.00, 150.00, 150.00 Manifest Placed Resolution Unit : Inches, Inches, Inches Manifest Reference Instance ID  : uuid:682a97c8-3d17-11db-a879-b4dd29165b25, uuid:A55A1020A0C5DE119B75DE4D63E152BB, uuid:cd64d5ff-3493-11db-812a-be637fddbc9a Manifest Reference Certificate ID  : adobe:docid:photoshop:682a97c4-3d17-11db-a879-b4dd29165b25, uuid:1164B8AD9FC5DE119B75DE4D63E152BB, adobe:docid:photoshop:cd64d5fe-3493-11db-812a-be637fddbc9a Create Appointment                     : 2009:xi:04 06:46:51-08:00 Modify Date                     : 2009:11:04 06:46:55-08:00 Metadata Appointment                   : 2009:11:04 06:46:55-08:00 Creator Tool                    : Adobe InDesign CS3 (five.0.4) Format                          : application/pdf Producer                        : Adobe PDF Library 8.0 Trapped                         : False Folio Count                      : 8 Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools